Water Extraction · Arlington, WA
Water Extraction in Arlington, WA — Get the Water Out Before It Soaks In
Squishing carpet, a flooded basement or an inch of water in the crawl space all need the same thing first. The water has to come out before it soaks deeper. TDC Clean & Dry handles water extraction across Arlington from our Stanwood base. We save as much of your home as we can.
Local conditions
Why extraction comes first in Arlington.
Extraction is the step that removes liquid water, as opposed to drying, which removes moisture left behind. It is the fastest way to limit damage. Every gallon pulled out by a machine is a gallon that will not soak into subfloors and walls.
In Arlington, waiting for water to evaporate is a losing plan. The city's NOAA station averages about 49 inches of precipitation a year, and damp outdoor air slows evaporation for most of it. Standing water left in a closed-up house just keeps soaking in.
Where the water collects depends on the house. Many of Arlington's homes, about 59 percent, were built between 1990 and 2009, often over crawl spaces. Water that reaches a crawl space pools on the ground cover and wicks into insulation above it.
Older homes and flood-prone areas add basements and lower levels to the list. When the Stillaguamish crested at 21.34 feet in December 2023, valley homes had water standing in garages, crawl spaces and ground floors. Extraction had to happen before any cleanup could start.
The goal is simple: remove water fast enough to save carpet, pad and structure. EPA advises cleaning and drying within 24 to 48 hours, and quick extraction is what makes that possible.
The local data
What extraction is racing against.
Water does more damage the longer it sits, and Arlington's climate slows natural evaporation. These four numbers explain why extraction cannot wait.
- Average yearly precipitation at Arlington's NOAA station1
- 49 in
- Share of Arlington homes built 1990–2009, many over crawl spaces2
- 59%
- Stillaguamish crest at Arlington in December 2023, against a 14 ft flood stage3
- 21.34 ft
- EPA's window to clean and dry a home after water gets in4
- 24–48 hrs
With damp air most of the year, water left to evaporate lingers far past that window.1 Extraction removes the bulk of it in a matter of hours instead. That leaves drying equipment a job it can finish before mold starts.4 Skipping extraction and running fans alone can stretch drying out for weeks in an Arlington winter.
Highest: Nov at 7.15 in. Lowest: Jul at 1.15 in.
View data table
| Month | in |
|---|---|
| Jan | 5.92 |
| Feb | 4.42 |
| Mar | 5 |
| Apr | 4.34 |
| May | 3.43 |
| Jun | 2.66 |
| Jul | 1.15 |
| Aug | 1.34 |
| Sep | 2.49 |
| Oct | 4.94 |
| Nov | 7.15 |
| Dec | 6.15 |
Sources
- 1. NOAA NCEI, U.S. Climate Normals, Arlington, WA (station USC00450257) (1991–2020 normals)
- 2. U.S. Census Bureau, American Community Survey 5-year estimates, Arlington city, WA (2024)
- 3. National Weather Service gauge ARLW1 and Snohomish County Emergency Management, as reported by KOMO News, FOX 13 Seattle and the Lynnwood Times (2023 and 2025)
- 4. U.S. EPA, Flood Cleanup to Protect Indoor Air Quality (current guidance)
Standing water in the house or crawl space?
The sooner it comes out, the more carpet, flooring and structure can be saved. We can pull the water out and tell you what is worth keeping.
Our process
How we extract water from Arlington homes.
Extraction works best when it is fast and thorough. Here is how our crew gets water out of an Arlington home and sets it up to dry.
- 01
Get to the water quickly
Our crew drives about 22 minutes from Stanwood to central Arlington with extraction equipment on board. We confirm the source is stopped and the space is safe before starting. Photos taken now support your insurance claim later.
- 02
Pull water from carpet and pad
Extraction tools pull water out of carpet and the pad underneath. Removing it from both layers gives the carpet its best chance of being saved. Passes continue until very little water comes up.
- 03
Pump basements and crawl spaces
Standing water in a basement or crawl space is pumped out first. Under a Kent Prairie home, that can mean working the full crawl space to reach low spots. Wet insulation hanging from the floor above is checked at the same time.
- 04
Decide what stays and what goes
After extraction, we check what can be dried and what cannot. Clean-water carpet can often be saved, while pad and anything soaked by floodwater usually has to go. We explain each call so you know why something stays or goes.
- 05
Hand off to drying without a gap
Dehumidifiers and air movers go in as soon as the water is out. The same crew handles drying and any repairs, so nothing waits on another company. Moisture readings track the drying from day one.
Warning signs
When your Arlington home needs water extraction.
If water is visible or you can feel it underfoot, extraction is the first step. These are the most common situations in Arlington homes.
Carpet that squishes when you walk
Wet carpet usually means the pad underneath is soaked too. Extraction pulls water from both before it reaches the subfloor. The longer it sits, the less likely the carpet survives.
Standing water in the crawl space
Water pooling on the crawl space ground cover will soak into insulation and framing if left. Homes on level ground, like many in Kent Prairie, are prone to it after heavy rain.
A flooded basement or garage
Basements in older Old Town homes and garages in valley homes are where water collects first. Pumping it out quickly limits damage to walls and stored belongings.
Water after a river flood
When the Stillaguamish rises, floodwater may carry bacteria and chemicals. Extraction comes first, followed by removal of contaminated materials. Valley homes near Arlington Heights needed exactly this after December 2023.
A leak that ran for hours unnoticed
A slow appliance or pipe leak can spread across a room before anyone sees it. Extraction removes what has pooled under flooring and cabinets. Thermal imaging then shows how far it spread into nearby walls.
Why us
Why Arlington homeowners choose our extraction crew.
Extraction is where speed and thoroughness pay off most. These are the reasons Arlington homeowners call our crew.
Extraction gear 22 minutes from Arlington
Our crew works from Stanwood, about 22 minutes away, and the emergency line is answered 24/7. The closer the crew, the less time water has to soak in.
Crawl space know-how for Arlington homes
So many local homes sit over crawl spaces that we come ready to work in them. Reaching every low spot keeps water from hiding under the house.
Honest calls on what can be saved
We tell you plainly which carpet and flooring can be dried and which cannot. That keeps costs down and avoids drying materials that will fail later.
Extraction to rebuild with one crew
The same Arlington crew extracts, dries and repairs. You avoid gaps between contractors, and insurance paperwork stays in one place.
Around Arlington
Water extraction across Arlington.
Where water collects depends on how a home is built and where it sits. These are the spots we check first in each part of town.
Old Town
Older homes near Olympic Avenue are more likely to have basements. Water pooling there needs pumping before it soaks into foundation walls. Stored belongings get moved to a dry spot first.
Gleneagle
Larger homes around the golf course often have big carpeted areas. Extracting quickly from carpet and pad can save flooring across several rooms.
Kent Prairie
Level ground means many homes sit over crawl spaces where water can pool. We extract from the crawl space as well as the rooms above it.
Smokey Point
Shops and offices near I-5 and State Route 531 need water out fast to reopen. We extract from commercial flooring as well as homes, and we work to limit downtime.
Arlington Heights
Valley homes east of town took floodwater in December 2023. Garages, crawl spaces and ground floors there need extraction before cleanup can begin.
Arlington FAQ
Water Extraction questions in Arlington, WA
Straight answers to the questions Arlington homeowners ask most about water extraction. If yours is not covered here, call and ask the crew directly.
What is water extraction?
It is removing standing water with extraction and pumping equipment before drying begins. Pulling water out mechanically is much faster than waiting for it to evaporate.
Can wet carpet be saved in Arlington?
Often, if the water was clean and it is extracted quickly. Carpet pad is usually replaced, and carpet soaked by floodwater or sewage generally has to be removed.
How much water can you remove?
Our equipment handles everything from a soaked carpet to a flooded basement or crawl space. The amount of water changes the time needed, not whether we can remove it.
What happens after the water is extracted?
Drying equipment goes in right away to remove moisture left in materials. We take moisture readings until the structure is dry, then handle any repairs.
Does insurance cover water extraction?
Extraction after a sudden leak is often covered, while flood damage needs separate flood insurance. We document the job and bill your insurer directly when a claim applies.
Can I use a shop vacuum instead?
A shop vacuum helps with small spills, but it cannot pull water from carpet pad or a flooded crawl space effectively. Water left behind keeps soaking in.
Reviews
What local homeowners say.
Real reviews from real clients on our Google Business Profile — unedited.
Get help now
Get the water out of your Arlington home today.
Call (206) 719-4508 any time. We will extract the water, save what can be saved and start drying right away.
(206) 719-450824/7 emergency line · Monday – Sunday 8:00 am – 4:00 pm · Free inspections
Schedule a Free Inspection
Tell us what is going on and we will get back to you as soon as possible. If water is coming in right now, call instead — it's faster.